Label Tap Handles
We personalize and customize beer tap handles for your kegerator or bar, starting with these stock handles. These galleries display custom beer tap handles that have been labeled, or have been both labeled and engraved. You can find information about each beer pull style, as well as a gallery of our custom labeling and engraving work, by clicking the tap handles below:
Runner Tap Handles with Custom LABELS
The Runner beer tap handle, designed for a kegerator or professional beer dispensing system, can be customized with both engraving and full-color labels. The Runner stands 11.75 inches tall. The tap face is a 1 inch thick oval that is 4 inches tall by 3.25 inches wide. Rugged black paint, applied to solid hardwood stock, is polished to a high shine. Gold-tone hardware is included (finial and ferrule), substitution of silver-tone hardware is available for $4 extra. There is a permanent gold-tone ring between the face and shaft. Our keg tap handles fit all standard US kegerators and professional bar equipment; we use 3/8 inch threaded ferrules.
Round Wonder Tap Handles with Custom LABELS
The Round Wonder tap handle, designed for a kegerator or professional beer dispensing system, can be customized with both engraving and full-color labels. The Round Wonder stands 12 inches tall, with a 1 inch thick face that is 3.5 inches in diameter. Rugged black or white paint, applied to solid hardwood stock, is polished to a high shine. Gold-tone hardware is included (finial and ferrule), substitution of silver-tone hardware is available for $4 extra. There is a permanent gold-tone ring between the face and shaft. Our keg tap handles fit all standard US kegerators and professional bar equipment; we use 3/8 inch threaded ferrules.
Empire Tap Handles with Custom LABELS
The Empire beer tap handle designed for a kegerator or professional beer dispensing system, can be customized with both engraving and full-color labels. The Empire tap handle comes in Regular and Large. The face is an oval 4.25 inches tall by 3.25 inches wide that is 1.125 inches thick. Large Empire beer taps are 12.5 inches tall, and Regular are 10.5 inches tall. Gold-tone hardware is included (finial and ferrule), substitution of silver-tone hardware is available for $4 extra. Our keg tap handles fit all standard US kegerators and professional bar equipment; we use 3/8 inch threaded ferrules. The extra-large size is no longer stocked (it was a bit too silly).
Square-top Tap Handles with Custom LABELS
The Square-top beer tap handle, designed for a kegerator or professional beer dispensing system, can be customized with both engraving and full-color labels. The Square-top tap handle comes in Small, Medium, and Large. All Oak handles sport a 3.5 inch face that is 1.125 inches thick, while the Walnut, a darker tap handle, has a 3.25 inch square face and similar thickness and styling. Large Square-top beer taps are 9.5 inches tall, Medium are 7.5 inches tall, and Small are 5.625 inches tall. The Walnut is only available in Medium, and is often paired with the oak handles for a set. The Extra-large oak handle has been discontinued. Our keg tap handles fit all standard US kegerators and professional bar equipment; we use 3/8 inch threaded inserts.
Walnut Rectangle-top Tap Handles with Custom LABELS
The Walnut Rectangle-top beer tap handle, designed for a kegerator or professional beer dispensing system, can be customized with both engraving and full-color labels. The Walnut Rectangle-top tap handle stands 10.75 inches tall. The tap face is a 1 inch thick rectangle that is 3 and three-eighths inches tall by 2 and an eighth inches wide. A clear polyurethane coat covers the dark stained walnut hardwood. Our keg tap handles fit all standard US kegerators and professional bar equipment; we use 3/8 inch threaded ferrules.
Walnut Paddle Tap Handles with Custom LABELS
The Paddle tap handle, designed for a kegerator or professional beer dispensing system, can be customized with both engraving and full-color labels. The Paddle tap handle suggests the shape of a kayak paddle. It stands 12 inches tall, is 2.375 inches wide, and at its thickest is 1.125 inches. A hard, glossy lacquer coats this walnut handle. Gold-tone hardware is included (ferrule), substitution of silver-tone hardware is available for $2 extra. Our keg tap handles fit all standard US kegerators and professional bar equipment; we use 3/8 inch threaded ferrules.
Oar Tap Handles with Custom LABELS
The Oar beer tap handle, designed for a kegerator or professional beer dispensing system, can be customized with both engraving and full-color labels. The Oar tap handle is a 3-D representation of a rowboat oar: thickest at the base where it meets the shaft, progressively thinner as it reaches the end of the blade. The oar stands 11.5 inches tall, and is 2.75 inches wide. A hard, glossy lacquer coats this hardwood handle. Our keg tap handles fit all standard US kegerators and professional bar equipment; we use 3/8 inch threaded inserts.
Surfboard Tap Handles with Custom LABELS
The Surfboard beer tap handle is a 3-D representation of a wood surfboard, complete with a keel on the back. The surfboard tap stands 10 inches tall and is 2.25 inches wide. A hard, glossy lacquer is applied to laminated hardwood stock (the wood sandwiches thin colored-wood stripes). Gold-tone hardware is included (ferrule), substitution of silver-tone hardware is available for $2 extra. Our keg tap handles fit all standard US kegerators and professional bar equipment; we use 3/8 inch threaded ferrules.
Round Ripple Tap Handles with Custom LABELS
The Round Ripple beer tap handle, designed for a kegerator or professional beer dispensing system, can be customized with both engraving and full-color labels. The Round Ripple tap handle stands 9.75 inches tall, with a 3.5 inch diameter, 1 inch thick face. A clear polyurethane coating displays the natural hardwood underneath. Gold-tone hardware is included (ferrule), substitution of silver-tone hardware is available for $2 extra. Our keg tap handles fit all standard US kegerators and professional bar equipment; we use 3/8 inch threaded ferrules.
Uro Pub Tap Handles with Custom LABELS
The Uro Pub beer tap handle, designed for a kegerator or professional beer dispensing system, can be customized with both engraving and full-color labels. The Uro Pub tap handle, at only 4.75 inches tall, should fit even the most space-challenged kegerators. You would want to choose this handle because of its uniquely short stature and shapely design; we sell larger keg handles for more typical applications. This tapper is 2 inches wide and 1.4 inches thick. Rugged black or white paint, or clear polyurethane coating, applied to solid hardwood stock, is polished to a high shine. Gold or silver hardware is included; the gold-colored ferrule is much more interesting in shape, the silver ferrule is smaller, and costs $2 extra. Our keg tap handles fit all standard US kegerators and professional bar equipment; we use 3/8 inch threaded ferrules. We are currently only selling the black version, as it is the most popular choice.
Pub Tap Handles with Custom LABELS
The Pub beer tap handle, designed for a kegerator or professional beer dispensing system, can be customized with both engraving and full-color labels. The Pub tap handle comes in Medium and Large. The Large tapper is 11.5 inches tall and 1.75 inches at its thickest diameter; the Medium tap is 11.25 inches tall and 1.75 inches thick (they are very similar, but the medium has a slender feel and more sculpting at the base, while the large maintains a heft and thickness throughout the design and comes with a larger ferrule). Gold-tone hardware is included (finial and ferrule), substitution of silver-tone hardware is available for $4 extra. Label Shields and Label Disk Finials are available for this style of handle. Our keg tap handles fit all standard US kegerators and professional bar equipment; we use 3/8 inch threaded ferrules.